|
|
|
 |
| |
ARM |
| |
The assembly extending from the column, which
supports the yoke, the motor, and the blade. |
|
 |
| |
BLADE |
| |
For maximum performance, use the Craftsman 40-tooth, 10 in.
carbide-tipped blade for ripping and crosscut operations. The
blade is powered by the main motor and turned off by the switch. |
|
 |
| |
BLADE GUARD ASSEMBLY |
| |
Protective unit over the blade, with a riving knife, anti-kickback
pawls, an upper blade guard, a lower outer blade guard, and
a lower inner blade guard. |
|
 |
| |
MOTOR (13.0/6.5 AMP) |
| |
Powers the blade and is controlled by the switch and key at
the front of the arm. The powerful induction motor has a capacitor
start. It is mounted in the yoke and rotated with the bevel
index knob and bevel lock lever. |
|
 |
| |
SWITCH WITH KEY |
| |
Powers the blade motor. Placed on the front of the arm for
easy access. To lock the switch once it has been pressed to
OFF, remove the yellow key. Place the key in a location that
is inaccessible to children and others not qualified to use
the tool. |
|
|
FAX
: 886-4-25574960